WORK PROCESS SCHEDULE QUALITY CONTROL INSPECTOR O*NET/SOC CODE: 51-9061.01 RAPIDS CODE: 0936 Description: Inspects completed handtools and parts in process, using statistical sampling techniques and following printed procedures, to evaluate quality of products: Selects, according to sampling tables, percentage of production lot of tools, such as planes, bit braces, levels, garden shears, tape, and folding rules. Examines
Molder
WORK PROCESS MOLDER O*NET/SOC CODE: 51-4071.00 RAPIDS CODE: 0349 APPROXIMATE HOURS A. CLEANING ROOM 300 1. Cleaning Castings by grinding, tumbling or sand blasting 2. Eye inspection for sand hole 3. Diversified Cleaning Work B. SAND MIXING 250 1. Mixing, treatment and blending of sand C. CUPOLA AND FURNACE 600
Control Equipment Electrician Technician
WORK PROCESSES CONTROL EQUIPMENT ELECTRICIAN-TECHNICIAN O*NET/SOC CODE: 49-2094.00 RAPIDS CODE: 0693 Description : Installs, troubleshoots, repairs, replaces, and calibrates electrical, electronic, hydraulic, and pneumatic equipment, apparatus, controls, and control systems, pressure, level, flow, and radiation-measuring instruments, electronic circuits and components, wiring and cabling systems, in chemical processing plant, following electrical code, schematic diagrams, blueprints and other specifications and
Machinist, Precision
WORK PROCESS SCHEDULE PRECISION MACHINIST (MACHINIST) O*NET-SOC CODE: 51-4041.00 RAPIDS CODE: 0296 This schedule is attached to and a part of these Standards for the above identified occupation. 1. TERM OF APPRENTICESHIP The term of the occupation shall be 8,000 with an OJL attainment of four (4) years supplemented by the required hours of related instruction.
Electronics Tester
WORK PROCESS ELECTRONICS TESTER O*NET /SOC CODE: 51-9061.04 RAPIDS CODE: 0570 Description: Performs variety of electronic, mechanical, and electromechanical tests on electronic systems, subassemblies, and parts to ensure unit functions according to specifications or to determine cause of unit failure, using electronic test instruments: Reads test schedule, work orders, test manuals, performance specifications, wiring diagrams, and schematics to
Patternmaker, Metal
WORK PROCESSES PATTERNMAKER, METAL O*NET/SOC CODE: 51-4062.00 RAPIDS CODE: 0395 DESCRIPTION: Lays out, mills, drills, turns, grinds, fits, and assembles castings and parts to make metal foundry patterns, core boxes, and match plates, using handtools and machine tools, and analyzing specifications, according to knowledge of patternmaking methods. Studies blueprint of part to be cast, computes dimensions, and plans sequence
Engineering Technician, Mechanical
WORK PROCESSES MECHANICAL – ENGINEERING TECHNICIAN O*NET/SOC CODE: 17-3027.00 RAPIDS CODE: 0777 APPROXIMATE HOURS A. BLUEPRINT READING 500 B. READING SCHEMATICS AND SYMBOLS 600 C. BASIC SHOP MATH 600 D. MAKING MEASUREMENTS 600 E. WORKING WITH METALS IN THE PLANT 500 F. WORKING WITH NON-METALS IN THE PLANT 400
Laboratory Technician
WORK PROCESS LABORATORY TECHNICIAN (Quality Assurance Technician) O*NET/SOC CODE: 19-4031.00 RAPIDS CODE: 0268 APPROXIMATE HOURS A. Phase One – Materials Sampling 520 1. Sampling bulk liquid shipments 2. Sampling bulk solid shipments 3. Sampling packaged liquid materials 4. Sampling packaged solid materials 5. Sampling packaging materials 6. Sampling in-process products B. Phase
Sewing Machine Repairer
WORK PROCESS SCHEDULE SEWING – MACHINE REPAIRER O*NET/SOC CODE: 49-9041.00 RAPIDS CODE: 0508 Description: Repairs and adjusts sewing machines in homes and sewing departments of industrial establishments, using handtools: Turns screws and nuts to adjust machine parts. Regulates length of stroke of needle and horizontal movement of feeding mechanism under needle. Dismantles machines and replaces
Mechanic, Industrial Truck
WORK PROCESS SCHEDULE MECHANIC, INDUSTRIAL TRUCK O*NET/SOC CODE: 49-3031.00 RAPIDS CODE: 0153 APPROXIMATE HOURS A. Gasoline Engine Repair 1500 1. Pistons, rings, valves, and bearings 2. Fuel systems a) Carburetion b) Fuel pumps B. Diesel Engine Repair 1,500 1. Four-cycle engines 2. Two-cycle engines 3. Pistons, ring, valves, and bearings 4. Starting systems
