WORK PROCESS PLANT OPERATOR O*NET/SOC CODE: 51-9021.00 RAPIDS CODE: 0961 DESCRIPTION: Operates concrete, asphalt, or sand and gravel plant to batch, crush, or segregate materials used in construction: Moves controls on panel board or control board to heat, dry, and mix ingredients, such as asphalt, sand, stone, and naphtha, to produce asphalt paving materials; to weigh and mix
Metal Fabricator
WORK PROCESS METAL FABRICATOR O*NET/ SOC CODE: 51-2041.01 RAPIDS CODE: 0325 APPROXIMATE HOURS A. Oxy-Fuel Welding 40 1. setup, adjust and regulate tanks, hoses and torch 2. tack, fillet and groove weld in the flat position 3. perform maintenance on oxy-fuel welding equipment B. Oxy-Fuel Cutting 400 1. setup, adjust and regulate tanks,
Marble Finisher
WORK PROCESS SCHEDULE MARBLE FINISHER O*NET-SOC CODE: 47-3011.00 RAPIDS CODE: 0973 Term of Apprenticeship: The minimum term of this occupation is two (2) years with an attainment of 3500-4000 supplemented by the required hours of Related Instruction. Ratio of Apprentices to Journeyworkers: The ratio of apprentices to journeyworkers is established in the applicable CBA, or
Drafter, Mechanical
WORK PROCESS SCHEDULE DRAFTER, MECHANICAL O*NET/SOC CODE: 17-3013.00 RAPIDS CODE: 0136 DESCRIPTION: Drafts detailed drawings of machinery and mechanical devices, indicating dimensions and tolerances, fasteners and joining requirements, and other engineering data: Reviews rough sketches and engineering specifications received from engineer or architect. Drafts multiple-view assembly, subassembly, and layout drawings as required for manufacture and repair of machines
Waste Water Systems Operator
WORK PROCESS SCHEDULE WASTEWATER SYSTEMS OPERATOR (Wastewater Treatment Plant Operator) O*NET-SOC CODE: 51-8031.00 RAPIDS CODE: 0507 This schedule is attached to and a part of these Standards for the above identified occupation. 1. TERM OF APPRENTICESHIP The term of the occupation shall be two years (2) with an OJL attainment of 3,520 hours supplemented by the required
Carpenter, Interior Systems
WORK PROCESS SCHEDULE INTERIOR SYSTEMS CARPENTER O*NET-SOC CODE: 47-2031.01 RAPIDS CODE: 0653/0653HY This schedule is attached to and a part of these Standards for the above identified occupation. 1. TERM OF APPRENTICESHIP The term of the occupation shall be three (3) or four (4) years with an OJL attainment of a minimum of 3,900 or
Electronics Technician
WORK PROCESS ELECTRONICS TECHNICIAN O*NET/SOC CODE: 17-3023.01 RAPIDS CODE: 0169 APPROXIMATE HOURS Orientation & Safety 400 Introduction to facility Company policies General safety procedures CPR & First Aid General Electrical Maintenance 5000 Service and maintain existing electrical and electrical related equipment, including plant lighting and receptacle circuits, motors, starters, relays,
Plumber (HY)
Work Process Schedule PLUMBER O*NET-SOC CODE: 47-2152.02 RAPIDS CODE: 0432, 0432-HY Alternative Titles: Journeyman Plumber; Building Trades Plumber; Drain Technician; Plumber Gasfitter; Plumbing and Heating Mechanic; Residential Plumber; Service Plumber; and Commercial Plumber This craft specific schedule is attached to and is part of these Apprenticeship Standards for the above listed occupation and alternative titles.
Furnace Installer and Repairer
WORK PROCESS SCHEDULE FURNACE INSTALLER AND REPAIRER O*NET/SOC CODE: 49-9021.01 RAPIDS CODE: 0794 DESCRIPTION: Installs and repairs hot-air furnaces, stoves, and similar equipment in accordance with diagrams and other specifications, using handtools and pipe-threading tools: Constructs foundation of concrete or other noncombustible material. Assembles and positions heating units in accordance with diagrams, using handtools. Cuts holes in floors
Carpenter, Residential
WORK PROCESSES SCHEDULE RESIDENTIAL CARPENTER SPECIALIST O*NET/SOC CODE: 47-2031.01 RAPIDS CODE: 0564 The following schedule is an example of work experience (OJT) and training considered necessary to develop a skilled and productive worker in the carpentry trade. Within the limits of basic trade requirements, the schedule is adaptable to local conditions. Approximate Hours A. General